A-Plus Polytite® Polyester Body Filler is a 2-component high strength and fast-drying Polyester body filler applicable to a wide range of substrates such as concrete, wood, metal, and fiber glass. Once mixed with the hardener, A-Plus® Polytite Body Filler immediately cures to a strong, durable, flexible, and highly sandable finish with excellent adhesion.
☑Professional Grade Formula ☑Superior Strength & Flexibility ☑Abrasion and Impact Resistant ☑For Wet and Dry Sanding ☑Easy Mixing and Fast Repair ☑Smooth and Fine Finish
Mixing and Application:
- Place required amount of A-Plus Polytite® Polyester Body Filler on a clean and dry mixing surface.
- Mix 1 part hardener to 60 parts A-Plus Polytite® Polyester Body Filler using a putty knife until a uniform colored paste is achieved.
- Apply using a putty knife to firmly spread body filler on the substrate prepared. Pot life when mixed with hardener is approximately below 3 minutes.
- After application, allow 20-30 minutes curing before sanding(#80/#180) and painting.
Principal Uses: Ideal for correcting surface imperfections such as cracks, crevices, holes, and dents, prior to painting.
Surface Dry: 3 – 5 minutes
Dry Through: 20 – 30 minutes
Thinning: Used as supplied
Clean-up Solvent: A-Plus® PG Lacquer Thinner
Application: Putty Knife, Spatula, Trowel
Packaging: 1L, 4L
