A-Plus Procrete® Epoxy Tank Lining is a thermosetting heavy-duty construction epoxy specially designed for storage tank applications. It is a water impermeable non-toxic coating that cures to an abrasion and chemical resistant barrier which makes it safely protect and maintain optimum storage tank conditions. This product is highly suitable for properly prepared substrates such as concrete and steel.
☑ 100% Solids Construction Epoxy Membrane ☑ Cures to an Extremely Tough, Hard, and Durable Reinforcing Material ☑ Superior Chemical Resistance (Solvents, Oils, Acids) ☑ Superior Adhesion and Does Not Shrink ☑ Fast Curing, Easy Workability, Wide Range of Application ☑ Non-Toxic, Food Grade, Lead-Free ☑ Ideal for Concrete and Steel Surfaces
Mixing Direction:
- Stir and shake both components separately before mixing together.
- Slowly add the hardener to the paint while mixing slowly and thoroughly for 5-10 minutes before application. For better mixing, transfer both components to a larger container. Mixing ratio: 3:1 by volume paint and catalyst, respectively.
- For maximum performance, allow at least 10-15 minutes induction period of mixture before using. Mix just enough for use on one working session.
- WARNING! Pot life of mixed Paint and Hardener is 1 hour at room temperature.
- If necessary, thin down minimally with A-Plus® PG Epoxy Reducer.
- MIX WELL BEFORE USING.
For Metal and Wooden Surfaces:
- Primer: Apply at least 1-2 coats of Glazer Galva-Plus® Epoxy Primer. Let dry 4 hours to overnight. To ensure good intercoat adhesion, apply topcoat within 3 days after priming.
- Putty:To fix minor surface imperfections, use A-Plus A&B® Non Sag Epoxy Adhesive. Sand smooth before applying topcoat.
- Topcoat: Apply at least 2 coats of A-Plus Procrete® Epoxy Tank Lining over the well-primed surface. Allow at least 4-6 hours before recoating.
For Concrete Surfaces:
- Ensure proper surface preparation and waterproofing.
- Primer: Apply at least 1-2 coats of Glazer Galva-Plus® Epoxy Primer using either a brush/roller. Let dry overnight. To ensure good intercoat adhesion, apply topcoat within 3 days after priming.
- Putty: To fix minor surface imperfections, use A-Plus A&B® Non Sag Epoxy Adhesive. Sand smooth before applying topcoat.
- Topcoat: Apply at least 2 coats of A-Plus Procrete® Epoxy Tank Lining over the well-primed concrete. Allow at least 4-6 hours before recoating.
Principal Uses: For interior surfaces of concrete and steel tanks for storing water, chemicals (except high concentration acids), agricultural products, powders, and other liquids.
Sheen: Gloss
Coverage: 20-25 sqm per gallon / coat
Surface Dry: 4-6 hours
Recoat Interval: 4-6 hours
Dry Through: Full cure within 7 days
Thinning: A-Plus® PG Epoxy Reducer
Clean-up Solvent: A-Plus® PG Epoxy Reducer
Application: Brush, Roller, Spray
Packaging: 4L
Pot life: 30 mins – 1 hour Available in Clear, White
